|
|
USB-FPGA Boards
The ZTEX FPGA Board Series currently consists in two mostly compatible FPGA Boards with different features as well as extensions and accessories.
An overview about available products can be found below.
Please click on the images for detailed information.
FPGA Co-Processor Cards
|
- Four Xilinx Spartan 6 LX159 FPGA (XC6SLX150)
- High-Speed (480 MBit/s) USB interface
- Cypress CY7C68013A EZ-USB FX2 Microcontroller
- On-board power supply
- 128 KBit EEPROM (e.g. for Firmware)
- Fast FPGA configuration (up to 24MByte/s) using CPLD
- On-board temperature sensors
- Optimized for cryptographic computations
- Allows to build low cost FPGA clusters
|
|
|
- Xilinx Spartan 6 LX159 FPGA (XC6SLX150)
- High-Speed (480 MBit/s) USB interface
- Cypress CY7C68013A EZ-USB FX2 Microcontroller
- On-board power supply
- 128 KBit EEPROM (e.g. for Firmware)
- Memory mapped I/O between EZ-USB FX2 and FPGA
- Optimized for cryptographic computations
- Allows to build low cost FPGA clusters
|
FPGA Boards
|
- High-Speed (480 MBit/s) USB interface
- Cypress CY7C68013A EZ-USB FX2 Microcontroller
- Xilinx Spartan 6 XC6SLX45 to XC6SLX150 FPGA
- 128 MByte DDR2 SDRAM with up to 1600 MByte/s and integrated 6 port memory controller
-
- 99 General Purpose I/O's (GPIO)
- 15 special I/O's (SIO)
- 128 KBit EEPROM (e.g. for Firmware)
- microSD socket for Flash memory
- Fast FPGA configuration using CPLD
- Memory mapped I/O between EZ-USB FX2 and FPGA
|
|
|
- High-Speed (480 MBit/s) USB interface
- Cypress CY7C68013A EZ-USB FX2 Microcontroller
- Xilinx Spartan 6 XC6SLX9 to XC6SLX25 FPGA
- 64 MByte DDR SDRAM with up to 800 MByte/s and integrated 6 port memory controller
-
- 90 General Purpose I/O's (GPIO)
- 15 special I/O's (SIO)
- 128 KBit EEPROM (e.g. for Firmware)
- microSd socket for Flash memory
|
Add-On Cards for FPGA Boards
|
- High-efficiency switching regulators to generate the supply voltages
- 1.2 V @ 8.0 A
- 2.6 V @ 2.5 A
- 3.3 V @ 2.5 A
- Wide input range: 4.5 to 16 V
- All I/O Ports available on a standard 2.54 mm (0.1 inch) grid
- JTAG interface for the FPGA
|
|
|
- High-efficiency switching regulators to generate the supply voltages
- 1.2 V @ 2.7 A
- 2.6 V @ 2.5 A
- 3.3 V @ 2.5 A
- Wide input range: 4.5 to 16 V
- All I/O Ports available on a standard 2.54 mm (0.1 inch) grid
- JTAG interface for the FPGA
|
|
|
- High-efficiency switching regulators to generate the supply voltages
- 1.2 V @ 2.7 A
- 2.6 V @ 2.5 A
- 3.3 V @ 2.5 A
- Wide input range: 4.5 to 16 V
- AVR ATXmega128A1 for analog capabilities:
- 2 eight-channel, 12 Bit, 2 Msps ADC, software selectable gain of up to 64
- 2 two-channel, 12 Bit, 1 Msps DAC
- Up to 76 General Purpose I/O's (GPIO's): up to 49 GPIO's from FPGA, 27 GPIO's from XMEGA
- All I/O Ports available on a standard 2.54 mm (0.1 inch) grid
- JTAG interface for the FPGA, AVR PDI interface for the XMEGA
- 12 LED's
|
|
|
- High-efficiency switching regulators to generate the supply voltages
- 1.2 V @ 8.0 A
- 2.6 V @ 2.5 A
- 3.3 V @ 2.5 A
- Wide input range: 4.5 to 16 V
- JTAG interface for the FPGA
|
|
|
for the Experimental Board.
|
Accessories
|
